Swivel Type Mud Mixing Gun Nozzle Life 10-20 Times Over Mild Steel Mixing Mud

Mud Guns are designed for submerged service in mud pits and are popular in 2", 3". Besides, 4" is available against client request. They can be a high-pressure gun or low-pressure, high-volume services such as in mud mixing systems employing centrifugal pumps.

All mud guns are equipped with handles and swivel joints as illustrated, permitting 360° rotation. Length should, in all instances, be specified when ordering.

The rubber nozzles to solve your pump problems more than to solve your mud nozzle problems. For many years, mud guns were used as the sole means of agitation. These devices usually carry mud from a downstream compartment and spray it into an upstream compartment to keep solids suspended. However, the true mixing effect of mud guns tends to be localized around the point where the nozzle may add 100-200 GPM of mud into the tank above and beyond the normal flow from the well.

AIPU solids control designed the rubber nozzles to solve your pump problems more than to solve your mud nozzle problems. For many years, mud guns were used as the sole means of agitation. These devices usually carry mud from a downstream compartment and spray it into an upstream compartment to keep solids suspended. However, the true mixing effect of mud guns tends to be localized around the point where the nozzle may add 100-200 GPM of mud into the tank above and beyond the normal flow from the well.

Technical parameters of APNJQ mud gun

Mud mixing guns are simple in design. All turning takes place on double rows of steel balls in flame-hardened races. There is nothing to tighten or adjust. Flow is unrestricted and pressure drop is minimum. PARVEEN mud mixing guns are of 3 types:

Spinner /Pivot Type

The spinner/pivot type mud gun is designed for use in tanks where the utmost in constant agitation is desired. The nozzles are set at an angle and the pressure in the line imparts a spinning motion which is accommodated by a style of 20 high-pressure swivel joints. Furnished in any desired length as specified in the order.

Size: 2″, 3″, 4″. Pressure: Up to 5000 PSI

Non Spin Type

The non spin type mud gun is designed for mixing large volumes of mud on the top of the tank or pit and also for transferring mud from one tank to another tank. Nonspin mud gun cannot spin because centrifugal force is neutralized by the offset of the barrel of the gun. Perforated flanges and locking pins permit the locking of a gun in any position.

Size: 2″, 3″, 4″. Pressure: Up to 5000 PSI

Bottom Type

The bottom type mud gun is designed for use where large size metal tanks are employed as mud pits. It is simple in construction, easy to install, and easy to operate.

Size: 2″, 3″, 4″. Pressure: Up to 5000 PSI

NOTE:

Discharge nozzles in all mud guns are equipped with a tungsten carbide insert.
Other sizes & pressure ratings are also available on request.

The role of the mud gun is the use of a three-cylinder pump or centrifugal pump to provide a certain pressure to impact the bottom of the tank sediment and then stir the mixer to mix the drilling fluid, it can also be used to clean the bottom of the sediment.

A mud gun is designed for use in a solids control system of a drilling rig. It is a tool that is mainly used for mixing drilling mud in the circulatory system and to prevent the mud from precipitating. The structure of the equipment is simple offering flexible operation and easy use. A mud gun is commonly used to guard against precipitates in a solids control system. The mud gun is installed in a mud tank.
Furthermore, it is usually used together with a mud agitator. The mud agitator is used in the middle of the tank while the mud gun is placed in the corner of the tank

Aipu NJQ mud gun means the drilling fluid mixing gun used in the mud system. The mud guns are fit on mud tanks. Usually, each agitator will fit one mud gun to be a partner working together. Agitators and mud guns will help to get better mud conditions. 

Application of APNJQ mud gun

Mud guns are designed for submerged service in mud pits and are popular in 2", 3". Besides, 4” is available against client request. They can be a high-pressure gun or low pressure, high volume service such as in mud mixing systems employing centrifugal pumps.

All mud guns are equipped with handles and swivel joints as illustrated, permitting 360° rotation. Length should, in all instances, be specified when ordering. Here we'll introduce  more details

If based on NJQ50, we need to confirm the nozzles of the mud gun. If NJQ50, the mud gun line is 2''. Then do we need 1 or 3 nozzles? Do we need to confirm do we need the normal pressure mud gun or the high-pressure mud gun? The materials and the valves will be different based on different requirements. Furthermore, the mud gun length, the mud gun height, and the connection pipe position. Finally, we confirm the mud gun quantity for a tank or for a system. Usually, we decide this according to mud agitators' number

Another important factor to consider is the installation way. Some clients request the bottom type, some clients request the pivot type, while some clients prefer the non-spin type. Please tell us your detailed requirements, or you can consult a professional engineer before ordering.

Why select the APNJQ mud gun?

There are many different demands from various clients. However, NJ mud guns at AIPU are high quality and rather popular with users. We utilize the high-quality raw material of carbon steel pipe, we use the quality polyurethane nozzle, and excellent painting oil. We manufacture and test the mud guns strictly according to executive code under certain pressure. Each mud gun will be fabricated as per the clients' actual demands and requirements. AIPU Mud guns are high quality and durable, NJQ50 mud guns are rather beautiful and helpful.

Benefits of APNJQ mud gun

• High-quality national standard steel.
• Discharge nozzles can be polyurethane and tungsten carbide alloy material.
• Flexible on the configuration of size and pressure rates.
• Simple design and easy to operate.
• High-quality painting job per international standard.
• Increasing nozzle life 10-20 times over mild steel.
• Increases mud mixing pump life by preventing large increases in mixing gun volume which often causes cavitation.
• The design of this nozzle makes it more efficient than the sharp shoulder in a 3 to 1 reducer. This feature increases blending and agitation.

Competitive Advantages

1. We offer high-quality products at competitive prices.
2. Shortest delivery time.
3. Flexible payment terms.
4. Timely after-sale service.
5. Most of our equipment can be replaceable with international brands.
6. Our products have been exported to Argentina, Egypt, the US, Australia, Romania, Pakistan, Dubai, Abu Dhabi, Iran, India, Indonesia, Vietnam, Malaysia, and many other countries.