3200rpm 154GPM Horizontal Drilling Mud Decanter Centrifuge

Horizontal Decanter Centrifuges Used In mud process for drillings and mud related materials

Decanter centrifuge information

Decanter centrifuges also referred to decanting centrifuge or centrifuge decanter. In drilling mud process for oil & gas drilling there are middle speed centrifuge and high speed centrifuge. They can be designed as fixed frequency and variable frequency centrifuge.

Now in stock centrifuge high speed one which model number is GLW355X1258 with 3200rpm speed and 35m³/h capacity. The bowl diameter is 355mm, while length is 1258mm. The minimum separation point is 2 micron and its separation factor is 2035G

Centrifuge main motor is 30kw (40hp), accessory motor is 7.5kw. This centrifuge in stock is fixed frequency one. Upon clients’ demand we can configure the VFD panel for it. Then the speed will be 0~3200rpm and VFD will lead better protection on motor as well as whole centrifuge

Why select Aipu decanter centrifuge?

All raw materials are high quality. Such as the screw conveyor, bowl, the support frame, the surface paint, the motor, the control panel, etc. 

Usually, finish one set centrifuge may take 30 days. But now, only in 1 week we’ll get all things cleared and make it arrive at port. For other requirements or options we’ll give you optimal solution soonest.
Finally, our aftermarket will definitely satisfy you on soon response as 7×24 technique support. The centrifuge is rather mature to save more cost on wearing parts as well as maintenance

AIPU High speed centrifuge spare parts

Main spare parts including the bearing, oil seal, the coupling, the cushion base, the fuse, etc. These are rather easy to get in the market and cost little.

Specification on APGLW355x1258

Other application of APGLW 355 centrifuges 

As we introduced before, the centriuges can be used not only in drilling fluids process. They can be used in many industry. Related to oil and gas industry or the drilling industry, they can be used in slurry separation, the sludge treatment, the waste management, and so on.

And in drilling fluids system, they are used to recycle or relcaim the barite, too. When we use both middle speed centrifuge and high speed centrifuge, the high speed one will be set behind the middle speed one. 

Do you have any demand on centrifuges? No matter for solids control or for drilling waste management,or for the slurry separation and sludge treatment. Please feel free to contact us.