Mud Recycling Submersible Slurry Pump Electricity Driven

Mud Recycling Submersible Slurry Pump Driven By Electricity

Submersible slurry pump introduction

The YZ submersible slurry pump is a single-stage, single-suction cantilever structure. The hydraulic components of the pump are connected with a bearing seat, a supporting seat, and a connecting pipe. The liquid is discharged from the liquid outlet pipe. The impeller of the pump is a semi-open impeller. The inlet extension is equipped with agitating blades. The main feature of the pump is that the pump shaft at the submerged part has sufficient rigidity. There is no bearing between the impeller and the pump casing, and no shaft seal is used. medium. The length of the pump inserted into the liquid is between 800-2000, and a suction pipe can be equipped if necessary. The shaft seal adopts a larger pump to run in the liquid, without shaft seal, the transmission is installed on the motor support and support seat by a vertical motor, and is connected with the pump by a coupling.

Slurry pump is heavy-duty constructed centrifugal pump, which is able to deal tough and abrasive duties. The term slurry pumps is consider a generic term, to separate from other type centrifugal pump, this one mainly use to intended for clear liquids.

Submersible slurry pump technical parameters

Why submersible slurry pump is popular with many solids control users?

Submersible slurry pumps can be used to transfer fluids with big particles. It is single stage and single suction slurry pump. The pump shell and impeller no bearing, no shaft seal, which can pump medium with quantity of solid particles at lower maintenance cost

Advantages of APYZ submersible slurry pump 

1. This series of submersible slurry pumps adopt the internationally advanced solid-liquid two-phase flow theory and are designed according to the optimization principle. The geometry of the flow parts conforms to the flow state of the medium, reducing the local and along the way hydraulics such as vortex and impact. Loss, thereby reducing the wear of the over-current components, improving the hydraulic efficiency, and reducing the operating noise and vibration;

2. The flow parts of this series of pumps are made of high-hard alloy castings, and their materials have high abrasion resistance, corrosion resistance, and impact resistance, thereby increasing their life. In addition, this series of pumps adopts dynamic pressure reduction to ensure the slurry Not easy to leak.

The scope of application of the submersible slurry pump

The submerged slurry pump produced by our company is mainly used in oil drilling mud systems. The device can also be used in environmental protection, municipal engineering, thermal power plants, gas coking plants, oil refineries, steel mills, mining, paper industry, cement plants, Food factories, printing and dyeing industries suck concentrated liquid, heavy oil, oil residue, dirty liquid, mud, mortar, quicksand and flowing sludge from urban sewage channels, as well as fluids containing mud, sand, and corrosive liquids.

The submerged slurry pump is a single-stage single-suction cantilever structure, and the impeller is semi-open. There are no bearings between the impeller and pump shells of the hydraulic slurry pump, and no shaft seal is used. It is maintenance-free. Generally, it can transport media with a large concentration and solid particles. The suction volume is large. The flow parts are made of wear-resistant alloys. .

Other applications of slurry pump

In many industries, slurry pumps are used to keep liquid and solids in mix with large spectrum of usage, such as mine drainage, dredging of setting lagoons and pumping of drilling mud. Slurry pump purpose can be pump the medium where abrasive particles are available. It also transfers as much solids as possible, hydraulically. It pumps the final product in the process. Many industrial segment use this pump like iron and steel, power generation, paper industry, oil and gas, wastewater treatment, mining, process mineral and other few.

Features of Aipu submersible slurry pump

High temperature resistant.
Maintenance free or special structure.
No bearing and gland seal for less repair cost.
Submerge length is customizable.
IECEX, ATEX, UL, DGMS, CE, GOST certs available against request.
Compact design takes little space.

Please feel free to contact Aipu solids control for any question. No matter on submersible slurry pump or solids control.You'll get optimal solution sooner