Heavy Duty Semi-Submersible Slurry Pump Dredge Pump Non-Clog Pump

The YZ Heavy duty submersible slurry pump with high chrome impeller & agitator. Flows available up to 6m3/min and heads up to 32 m. The liquid is discharged from the liquid outlet pipe. The impeller of the pump is a semi-open impeller. The inlet extension is equipped with agitating blades. The main feature of the pump is that the pump shaft at the submerged part has sufficient rigidity. There is no bearing between the impeller and the pump casing, and no shaft seal is used. medium. The length of the pump inserted into the liquid is between 800-2000, and a suction pipe can be equipped if necessary. The shaft seal adopts a larger pump to run in the liquid, without the shaft seal, the transmission is installed on the motor support and support seat by a vertical motor and is connected with the pump by a coupling.

Slurry Pumps and Dredge Pumps for Sludge & Muck.

A slurry pump is a heavy-duty constructed centrifugal pump, which is able to deal with tough and abrasive duties. The term slurry pumps are considered a generic term, to separate from another type of centrifugal pumps, this one is mainly used intended for clear liquids.
Why submersible slurry pump is popular with many solids control users? Submersible slurry pumps can be used to transfer fluids with big particles. It is a single-stage and single-suction slurry pump. The pump shell and impeller no bearing, no shaft seal, which can pump medium with the quantity of solid particles at lower maintenance cost

Submersible slurry pump technical parameters

Advantages of APYZ submersible slurry pump 

:
1. This series of submersible slurry pumps adopt the internationally advanced solid-liquid two-phase flow theory and are designed according to the optimization principle. The geometry of the flow parts conforms to the flow state of the medium, reducing the local and along the way hydraulics such as vortex and impact. Loss, thereby reducing the wear of the over-current components, improving the hydraulic efficiency, and reducing the operating noise and vibration;

2. The flow parts of this series of pumps are made of high-hard alloy castings, and their materials have high abrasion resistance, corrosion resistance, and impact resistance, thereby increasing their life. In addition, this series of pumps adopts dynamic pressure reduction to ensure the slurry Not easy to leak.

The scope of application of the submersible slurry pump

The submerged slurry pump produced by our company is mainly used in oil drilling mud systems. The device can also be used in environmental protection, municipal engineering, thermal power plants, gas coking plants, oil refineries, steel mills, mining, paper industry, cement plants, Food factories, printing, and dyeing industries suck the concentrated liquid, heavy oil, oil residue, dirty liquid, mud, mortar, quicksand and flowing sludge from urban sewage channels, as well as fluids containing mud, sand, and corrosive liquids.

The submerged slurry pump is a single-stage single-suction cantilever structure, and the impeller is semi-open. There are no bearings between the impeller and pump shells of the hydraulic slurry pump, and no shaft seal is used. It is maintenance-free. Generally, it can transport media with a large concentration and solid particles. The suction volume is large. The flow parts are made of wear-resistant alloys.

The technical conditions of this product meet the standard of JB/T8096-1998 "Centrifugal Slurry Pump".

Other applications of slurry pump

In many industries, slurry pumps are used to keep liquid and solids in mix with large spectrum of usages, such as mine drainage, dredging of settling lagoons, and pumping of drilling mud. Slurry pump purpose can be to pump the medium where abrasive particles are available. It also transfers as much solids as possible, hydraulically. It pumps the final product in the process. Many industrial segments use this pump like iron and steel, power generation, paper industry, oil and gas, wastewater treatment, mining, process mineral and other few

Features of Aipu submersible slurry pump

• Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design
• 30-70% Solids Pumping by Volume
• Ability to pump objects of up to 12-inches in diameter
• 100% American Built
• State-of-the-Art Research and Development Facilities on site
• Easily process rags, string, rocks, and foreign objects
• Options
• Vertical or Horizontal Mounting
• Submersible / Immersible
• Process Pump Applications
• Electric or Hydraulic Powered
• Various Metals Available
• Variable Speed Control
• Self-Priming
• Trailer / Skid Mounted
• Bearing House / Close-Coupled
• Automated Controls
• Pump Features
• Premium Seal Support System
• Non-Clogging Design
• High Solids Handling
• High Viscosity and Specific Gravity Handling
• High Abrasives Handling
• No Critical Tolerances
• Low Maintenance
• Minimal Downtime
• Low Ownership Costs

Please feel free to contact Aipu solids control for any questions. No matter on the submersible slurry pump or solids control. You'll get optimal solution sooner