12" Drilling Fluids Mud Tank Suction Valves Stainless Steel Seamless Tube

Drilling Mud Equipment Customizable Length Mud Tank Dump Valves

The suction valves acts as a control valve in the use of drilling mud tanks that are used to control the mud flow during the system operation or mud reserve. It plays an important role in the whole solids control system.

Mud tank valves including the suction valves and dump valve. The material can be common butterfly valves, seamless tube, even the stainless steel.

Considering the fluids flow pattern, mud tank valves can be customized into T pattern and cross type, the difference is the suction port design.

According to the pipeline configuration in mud tanks, there are 6", 8", 10" and 12" valves for users' options

Parameters of mud tank suction valves

Mud tank suction valves features

In the beginning, we have the mud tank suction valves configured with a handle wheel, we call it a screw-type operator. Now we have valves with lever handle for choice as more and more users prefer.

End of mud tank dump valve (bottom valve) including the outer tube, connecting rod, connecting tube, screw, outer tube bottom side connected to the pipe, connecting rod set outer tube, screw connected to the outer tube of the connecting rod, connecting rod connected to the set at the bottom of the outer tube sealing rubber, sealing rubber base and Mosaic of sealing, the valve base for medial pyramidal structure of the inclined plane, the sealing rubber surface in contact with the valve base and valve base for the same slope, slope gradient sealing rubber by upper and lower two pieces of round metal plate fixation; The connecting part of the outer pipe and the outer cylinder of the lead screw is above the tank surface. The utility model improves the sealing property of the submarine valve itself, and the conical sealing structure reduces the axial bearing capacity of the lead screw to the sealing rubber by about 20%, thus prolonging the service life of the rubber, and the connecting part of the outer pipe and the outer cylinder of the lead screw is raised above the tank surface, meeting the requirements of rapid maintenance.

Popular mud tank valves are 8" and 10". For detailed dimensions or sizes, they can be manufactured to suit various customers' tank depth, suction height, suction line requirement, and other special requirements.

The material used for the O-Ring for Disc Plunger assembly and other seals used on the flange end is Viton synthetic rubber for high-temperature resistance.

How to maintain the suction valve in our routine work to make sure its performance, there are some tips for your information

1. Make sure the correct installation and removal of the suction valve.

2. To inspect the o-ring and gasket at various locations, and replace them if they are damaged.

3. To check if the bearing is flexible or damaged.

4. Apply a proper amount of butter to the screw after checking the installation and fill the oil cup with better to ensure that the handwheel rotates flexibly.

Mud tank suction valves price

The mud tank suction valve varies much with different mud tanks' designs. But the general design and cost are similar. For example, 8" mud tank suction valve with screw type operator and T port average price is about USD900. If you need official please give us detailed requirements such as length, color.. and quantity. Any questions or interests will be highly welcome. 

The suction valve height calculation

Firstly, confirm the valve body pipe size. some valves are made of the same tubes on both body and connection port, while part of is different. Then confirm the mud tank height, its internal height. Thirdly, confirm the internal pipe level. Finally, if any special requirements on handling the tank top. Based on the above information, AIPU solids control can provide a general drawing. Against confirmation, the mud tank suction valve can be finished easily.