Corrosion Resistant Drilling Mud Centrifugal Degasser For Solids Control System 300m³/H

Vertical Centrifugal Degasser Corrosion Resistant For Solids Control System With 300m³/h Capacity

Description of centrifugal degasser

Centrifugal degasser, also called atmospheric Degasser is a highly efficient equipment that remove gas from the gas cut mud by accelerating the fluid through a submerged centrifugal pump's impeller. APLCQ300 centrifugal degassers|atmospheric degassers has many advantages although the treating efficiency is practically the same which is above 85%. Normally degasser is installed after shale shaker and widely used in various solids control system, and it is very important for recovering mud weight, stabilize mud viscosity performance, reduce drilling cost.
APLCQ300 centrifugal degasser|atmospheric degasser accepts any fluid weight or mud viscosity while the simple switch operation is granted rapid startup and shutdown. The rugged bowl and custom impeller extend part life.At start-up, drilling fluid enters the submerged impeller and travels up to the elevated spray tank. A circular disc (splash plate) turns the fluid into a high-velocity sheet that strikes the wall of the bowl with enough force to separate the gas from the fluid. The degassed fluid then flows downstream through a discharge pipe.

Technical parameters of APLCQ300 vertical centrifugal degasser

Why clients prefer centrifugal degasser?

Vacuum vessel type degasser is the traditional vacuum degasser in China, it is a self-contained type and no need an extra jetting pump like . The working principle is as below:
The vacuum pump creates negative pressure in the horizontal type vacuum tank, so it can suck the mud from the mud tank under the vacuum degasser, then the mud spray to the tank wall through surrounded windows of the hollow shaft. The mud separated into thin layers, bubble immersed in the slurry breakup and gas escape. Gas is discharged to a safe zone from the gas separator through the suction of the vacuum pump and separation of the gas water separator.
It's a typical vertical degasser occupies less space. Such degasser is a rather powerful and energy-saving design. From the drive to the filtration configuration at the input bottom it leads to good performance and ability to suit the different working conditions.

Vertical centrifugal degasser and vacuum degasser in Aipu solids control

Aipu solids control produces both vacuum degasser and centrifugal type degasser for oil & gas drilling solids control system. The centrifugal degasser at AIPU is the high-quality API standard degasser. The model is APLCQ300. ​APLCQ300 centrifugal degasser|atmospheric degasser accepts any fluid weight or mud viscosity while the simple switch operation is granted rapid startup and shutdown.

Such degasser is equipment holding high treating capacity, high efficiency, compact, and easy to operate. The filtration screen and impeller are welded by S.S. It's holding a high ability to resist corrosion.

How do we ensure the balance of internal structure in degasser during operation?

The shaft upside is steadily fixed with the main structure, the impeller and shaft are connected by fixing plate and bolts. The bottom of the degasser vessel is designed with a stabilizer to avoid shake or vibration. Furthermore, the shaft and impeller will be processed by dynamic balance for better performance.
Some clients may find out our centrifugal degasser is different from other manufacturers in some detail.
Ye. Our degasser is powered by 30HP motor, this will help get higher efficiency and better performance. Especially when the mudflow rate is high during the deep oil well drilling.