Dry Shaker Drilling Mud Equipment For Waste Management

Dry shaker used in drilling fluids process or the waste management

AIPU Hunter series shale shakers are high-quality products and are appreciated by all of the clients. High efficiency and reliability are enough. The drying shaker contains the all features and benefits of the AIPU common shaker. The difference between a drying shaker and a common Hunter shaker is the motor and the vibration strength or the centrifugal force produced by vibration motors. A Shale shaker is high-quality equipment for the drilling mud process. Considering the drying function on drilling fluids and waste, the vibration mode is linear motion. It is widely used in oil and gas drilling, and waste management for sludge treatment. The shaker is driven by 2 same power vibrations more provide efficient productivity. Its main structure is a shaker basket, base, feeder box, screen panel, motor, control panel, buffering spring

Please find below information on AIPU dry shaker specification

Besides solids control, the shale shaker can be used to process the oil sludge or waste management. The design on-screen or deck may vary, but the main structure will be the same. Some construction industries, such as HDD, piling, and tunneling will request shakers and other equipment to process fluids. Hunter is an ideal equipment to help users get great solid-liquid separation results.

Drying Shakers are used in processing cuttings. It is the first phase solids control equipment in the drilling fluids recycling system, which plays an important role in the waste drilling mud treatment. With a stable and durable drying shaker, it brings to customers both economic and environmental benefits.

The drilling cuttings discharged from the primary shale shaker and desander desilters will be picked up by a screw conveyor, and another screw conveyor will take the drilling cuttings to feed to the drying shaker. Sometimes, the client will install a low-profile drying shaker just under the solids control tank to feed to the drying shaker directly. The drilling cuttings will be dried by the shaker, and fluids will be caught by the tank under the shaker, a centrifuge feed pump will take the fluids and feed them to a high-speed decanter centrifuge, after treatment by the high-speed decanter centrifuge, the fluids can return back the active mud system for reuse.

Hunter drying shaker is easy to operate and maintain. The screen panels are convenient to install and replace. We just need to knock out the wedge block and pull the panels out of deck, then put on the new panels to be used and put on the wedges there, knock them tight and ensure no loose. Thus screen will no move to deck or shaker basket user will get good performance.

For the shaker motors, we use the famous brand Oli or Martin. Some clients request higher configuration level. Then the motors will be Ital-Vibras imported from Italy. High-quality motors will help much with stable performance and good results.

The deck angle can be adjusted easily by just screw the nut on the jackscrew. And angle should be adjusted according to actual working condition. For example, when we need high flow rate we need to make deck with small minus angle or in parallel to ground. If we need better filtration or more dry solids, please make a deck with uphill angle. The rotation can be clockwise or anti-clockwise

Moreover, clients will use AIPU shaker to process the slurry or some high water content mixture of sand and water, etc. The Hunter shaker will help much to save the economic benefits and the time benefits for clients.

Based on different requirements of the job site the drying shaker can be made as dual tandem and a triple tandem, too. The G force of the motor can be adjusted according to practical demand. It's easy to achieve. The higher vibration strength will lead less flow rate but the better drying effect and the better performance.

Please feel free to contact AIPU Solids control. Get a free offer now!