ZJ30 Drilling Fluids Solids Control System 300KW Mud Storing

ZJ30 Drilling Fluids Processing System With Total 300KW Power
 
Aipu can provide solids control system with different handing capacity. There is main introduction is ZJ30 solids control system.
Drilling fluids processing system is the mud circulation system for well drilling. ZJ30 rig is the common reference of oil rig can drill well deep to 3000m. With 120 m³/h capacity and 3 set mud tank
 
List of ZJ30 mud solids control system equipment

Benefits of Aipu solids control system

Solids Control System manufactured by Aipu have a good performance of cold-resistent, high temperature resistance, anti-explosion, anti-leakage, anti-corrosion, raining proof, adapt to wicked condition of well drilling.
There are intermediate pressure mud pipelines and rinsing pipelines on the top of the tanks.
Behind the tank, there is a pressure bar type clear sand door. It is appropriate and neat to open.
To use durable links between the tanks, it is convenient to set up and dismantle, has a good scalability.
Accurate positioning between tanks, and can connect rapidly.
The drilling mud solids control level is high, the effect is good, and the measurement of mud is accurate.
The tanks are composed of corrugated boards of the V type. Holistic rigidity is good and the appearance is pleasing.
The surface is interpreted with sandblasting. The in-tank is painted with intense anti-corrosion bituminous paint, and outside of the tank is painted by the oil-proof and acid and alkali corrosion resistant paint.
Comply with the requirements of remote and installation of the drilling crew frequently.
Drilling Mud Solids Control System can be prepared according to the customers’ requirements.

Drilling fluids processing system configuration

Different drilling condition and users will request different mud system configuration. But main equipment are same. The shale shaker, the mud cleaner or hydrocyclone separators, degasser, mud decanter centrifuge, pumps, agitator, mud guns, and so on
The difference among different configuration is flow rate. The mud flow rate of mud pump will help to confirm mud system and equipment selection.
Economical and practical configuration of ZJ30 solids control system 
 
Drilling fluids processing system have many flexible features. Such as the tank volume, tank quantity, shaker and centrifuge configuration. We can set totally 8 tanks. Including processing tank, reserve tank, water tank, mixing tank, and so on
 
On the tanks, there are 2 sets shale shaker, 1 set decanter centrifuge, totally 3 centrifutal pump and 7 sets mud agitator . And also 1 set shear pump 
.
Many clients prefer large mud system since the efficiency and better performance. Besides mud tanks volume, equipment quantity and detail configuration will impact whole mud system operation efficiency. Our design is customized according to the customer actual demand.

Characteristics of Aipu solids control drilling fluids processing system

• Customized drilling mud purification system.
• Benefits of Low Solids In Drilling Mud.
• Increased drilling penetration.
• Increase bit or back reamer life.
• Reduce investment, but enjoy high efficiency.
• Reduce triplex mud pump, mud motor & surface equipment maintenance cost.
• Reduced cleanup & haul off or disposal cost.