355mm Drum Hydraulic Drive Oilfield Centrifuge 37KW Solids Control

APLW355x1258-FDH Hydraulic drive Oilfield Mud Centrifuge With 37KW Motor

We, AIPU focus on the solid control industry over 20 years and we have a professional technical team. We can supply hydraulic centrifuges and motor driven centrifuges. I believe we'll have many opportunities for cooperation in the future. And I firmly believe that cooperating with us, you'll find that we are different from other suppliers and you don't need to spend energy time to seek other suppliers

Introduction of APGLW series decanter centrifuge

APGLW Decanter centrifuge is a normal decanting centrifuge made of Aipu company, they are ideal choices for separaring particles in driling mud. Decanter centrifuge deparate the suspending fluids using the principle of centrifugal action, the suspending fluids is pushed into the rotor drum through the inlet pipe and fluid hole of the spiral feeder. Under the influence of centrifugal force, solid phase particles are pushed to the internal wall of the drum, then to the mud export of the samll end of the drum and excreted. But the fluids is excreted from the overflow hole of the large end. Such cycle is in order to achieve the purpose of continuous separation. High speed decantering centrifuge are effectice for separation.

Decanter centrifuge is the 4th solids control equipment in whole drilling mud system and peroid. It is used to process drilling mud discharged from desilter cones or mud cleaner and peroid

APLW355x1258-FDH is high speed centrifuge decanter used in drilling fluids process for oil and gas drilling. The centrifuge can be used separated in solids control system, or used together with the middle speed centrifuge. Besides fine cuttings removal, the APLW355x1258-FDH centrifuge can get the barite recycled. 

Why AIPU APGLW centrifuge decanter?

From the raw material to the test prior to delivery, AIPU provide all issues high quality. And we implement the strict QC regulations. Centrifuge is a rather mature equipment in drilling fluids process. Compared to other brand or models, AIPU centrifuge is more competitive and easy to maintain. As solids control manufacturer, we are rather professional and providing the optimal solutions.

And AIPU provides the customization service on many different aspects. Such as the color, the base design, the motor electrical sytem, the necessary certificates, etc.

Working principle of centrifuge

The working principle of horizontal screw centrifuge is very simple. It has been known by the public for a century. The drum and screw are supported by separate suspension.The material enters through the inlet pipe and accelerates into the core drum body through the drum.

Specification on APLW355x1258-FDH

Centrifuge here is also referred as the centrifuge decanter or decanting centrifuge. High speed centrifuge speed is 2800-3200rpm. And for the high speed centrifuge, suggest the VFD high speed centrifuge. Centrifuge is set after the mud cleaner or the desilter. As we know the desilter cone theoretically remove solids larger than 15 microns. While centrifgue can remove 2-7 microns cuttings. The high speed centrifuge can get rid of 2-5 microns particles. 

AIPU  centrifuge holding drum sized 450x1258mm. Means the drum diameter and length. The main motor is 37kw according to different demand, the back drive motor can be 7.5kw and 11kw accordingly. While the feeding pump (submersible slurry or the screw pump) is usually 7.5kw. The material of wet parts can be S.S304L or the Dupex 2205 stainless steel 

The maximum flow rate of the APGLW355 centrifuge is 35m³/h at rate of 3200rpm. However, when the speed varies the centrifuge flow rate varies, too.

AIPU High speed centrifuge spare parts

Main spare parts including the bearing, oil seal, the coupling, the cushion base, the fuse, etc. These are rather easy to get in the market and cost little.

Other application of APGLW centrifuges 

As we introduced before, the centriuges can be used not only in drilling fluids process. They can be used in many industry. Related to oil and gas industry or the drilling industry, they can be used in slurry separation, the sludge treatment, the waste management, and so on.

And in drilling fluids system, they are used to recycle or relcaim the barite, too. When we use both middle speed centrifuge and high speed centrifuge, the high speed one will be set behind the middle speed one. 

If any demand of decanter centrifuge, just feel free to contact Aipu, you'll get optimal solution