Linear Motion Drilling Waste Management Equipment SS316L

Dry shaker used in drilling fluids process or the waste management

AIPU Hunter series shale shaker is a high-quality product and appreciated by all clients. High efficiency and reliable enough. The drying shaker containing the all features and benefits of the AIPU common shaker. The difference between the drying shaker and the common Hunter shaker is the motor and the vibration strength or the centrifugal force produced by vibration motors. Shale shaker is high-quality equipment for the drilling mud process. Considering the drying function on drilling fluids and waste, the vibration mode is linear motion. It is widely used in oil and gas drilling, for waste management for sludge treatment. The shaker is driven by 2 same power vibration more provide efficient productivity. Its main structure is shaker basket, base, feeder box, screen panel, motor, control panel, buffering spring

Please find below information on the AIPU dry shaker specification

Besides solids control, the shale shaker can be used to process the oil sludge or waste management. The design on-screen or deck may vary, but the main structure will be the same. Some construction industries, such as HDD, piling, and tunneling will request shaker and other equipment to process fluids. Hunter is an ideal equipment to help users get great solid-liquid separation results.

Drilling muds are necessary to prevent the collapse of excavation walls in unstable soil. Muds are prepared by mixing bentonite powder with water in different ratios. Bentonite mud has excellent thixotropic properties, forming the cake a short time after mixing water+bentonite and releasing heat. Bentonitic muds are suspensions of very fine grain clay powder, mixing must be done in a certain way in order to achieve a colloidal suspension. There are also available polymeric muds, made by mixing water + chemical products, however so far bentonite mud is still of higher quality for all types of soil, and also polymeric muds cannot be pumped with common centrifugal pumps, since this would break the polymer chain.

The operation and maintenance of the Hunter H-G Dry Shaker are not difficult. The screen panel is easy to install and replace. We just need to knock off the wedges, pull the panels out from the deck, and put the new panels on the wedges, and knock them tight to make sure there's no damage. Therefore, the screen will not move to the deck, otherwise, the vibrating screen basket user will get good performance.

The vibrating screen motor adopts the famous brand OLI or MARTIN. Some clients require a higher level of configuration. Then the motor will use Italian vibrators imported from Italy. A high-quality motor will greatly contribute to stable performance and good results.

The Angle of the platform can be easily adjusted by simply turning the nut onto the top screw. The Angle should be adjusted according to the actual working condition. For example, when we need high flow, we need to make a small negative Angle or a deck parallel to the ground. If we need better filtration or more dry solids, please make a deck with an uphill Angle. Can rotate clockwise or counterclockwise

In addition, customers can also use APU shaker processing mud or some high water content of sand and water mixtures.Hunter h-G shaker will greatly help customers save money and time gains.

According to the different requirements of the worksite, the dryer can also be made into two series and three series. The gravity of the motor can be adjusted according to the actual need. It's easy to do. The higher the vibration intensity, the smaller the flow, but the better the drying effect, the better the performance.

Please feel free to contact AIPU solid control. Get a free quote now!