DN200 16Kv 50HZ Carbon Steel Flare Ignition Device

High Quality Carbon Steel Flare Ignitor Used In Oil And Gas Well Drilling

Description of flare ignitor

Oilfield gas flame connected with poor boy degasser via vent line/gas discharge line. The vent line is the gas discharge line with 8" diameter. The Flare ignitor is also referred to flare ignition device

Aipu solids control manufacture high quality well drilling fluid flame ignitor. Battery can be electricity charged or solar power supply

The flare ignitor is used to process tail gas and gas from poor boy degasser. Usually flare ignitor is operated with mud gas separator (poor boy degasser). They are used together to process the toxic gas. The flare ignitor is a security equipment. We also treat it as environment protection equipment. It burns harmful gas to eliminate the harm to the environment.

Why do we need the APFI flare ignitor?

The flare ignition device is used to light the waste gas in the oil and gas industry. It is connected with poor boy degasser, which separates gas from drilling mud and vent gas to flare ignition device

Burn the harmful or poisonous gas by ignitor will eliminate threats to environment and safety. Every flare ignitor will be operated together with mud gas separator. They will be connected with the vent line or gas discharge line. They are widely used in oil and gas drilling.

Besides traditional flare ignitor, Aipu also manufactures the ignition device with a solar panel. The battery will be charged under sun energy. This is more environmental-friendly with green energy.

For each flare ignition device, we’ll configure the burner, the control panel, the joint connection, a small tank with LNG. Between the ignitor and the fuel line, there is a flame arrestor ensure the safety during ignitor operation

And now, as a matured product it has been extensively used in petroleum drilling engineering.

Main specification of flare ignitor

Model name of AIPU flare ignitor is APFI20/3. The model name including AP for company name in short, 20 for torch diameter and 3 for flare height.

The torch diameter of flare ignition equipment is 200mm size and burn height is 3m for safety and convenient operation.

The working voltage is 220V and ignition voltage reaches to 16Kv and ignition frequency reaches 100 to 1000 per minute.

There is a back valve for gas entrance to avoid gas back flow while ignition and burning to keep sure safe burning.

What are the types of flare ignitor?

Based on the installation way, there are vertical type and horizontal type. That means the torch port direction is parallel to the ground or normal to the ground.

Based on the fuel material, there are LNG flare ignition device or the diesel flare ignitor. Considering the power supply, there are the electrical gas flame and the solar gas flame.

There are the fixed control panel and the remote control gas flame. Besides the above division, we can customize the gas flame according to the user and the practical working condition. Such as we made the extrah gas flame for an oil drilling company. The overall height is about 5m.

Tips to note while igniter operation

1. Confirm the power system is under AC
2. Do not push ignition button on when the cable is not connected with ignition rod
3. No move/connection when it is working
4. Do not connect control panel output line to any other power supply but only high voltage device
5. The control cabinet and ignitor is non-explosion proof equipment. Please pay attention on any flammable fluid or explosive gas

Technical specification of AIPU flare ignition device

For any question or demand, please feel free to contact AIPU solids. We will provide you with professional technical solutions