AIPU High Capacity Treating Hunter Oilfield Shale Shaker

Dryer Shaker Used In Drilling Fluids Process Or The Waste Management

AIPU Hunter Drying Shakers are an ideal and effective solid control equipment for high-capacity treating in the heavy loading and tough drilling conditions , its easy to maintain, the single side screens tension system make it easy to change the screens. The AWD system could change the angle of shaker deack from -1°~5°,it can remove cuttings above 75μm brought from the drilling.

Hunter drying shaker is the first generation of high-frequency shale shakers according to the international standard which has special structure and stable processing results and gains more praise worldwide.

Hunter drying shaker is designed in linear motion and high vibration mode to achieve the expected separation effect.

Please find below information of AIPU dry shaker specification

Besides solids control, the shale shaker can be used to process the oil sludge or waste management. The design on-screen or deck may vary, but the main structure will be the same. Some construction industry, such as HDD, piling, and tunneling will request shaker and other equipment to process fluids. Hunter is an ideal equipment to help the user get great solid-liquid separation result

Hunter drying shaker is easy to operate and maintain. The screen panels are convenient to install and replace. We just need to knock out the wedge block and pull the panels out of the deck, then put on the new panels to be used and put on the wedges there, knock them tight and ensure no loose. Thus screen will no move to deck or shaker basket user will get good performance.

Benefits

Drying shaker, the first choice of oilfield environmental waste drilling cuttings screening and drying, combined with USA advanced technology, winning the order quantity of 50 sets in the USA and 2 sets for export to Russia, is the product which is firstly guided by the domestic and gains high customer recognition and bulk subscription.

1. High efficiency and varied frequency.
2. The capacity is 30% higher than that of the same product on equal conditions.
3. Less vulnerable spare parts, easy operation, and maintenance.

For the shaker motors, we use famous brand Oli or Martin. Some clients request a higher configuration level. Then the motors will be Ital-Vibras imported from Italy. High-quality motors will help much on stable performance and good result.

The deck angle can be adjusted easily by just screw the nut on the jackscrew. And angle should be adjusted according to actual working conditions. For example, when we need a high flow rate we need to make a deck with a small minus angle or in parallel to the ground. If we need better filtration or more dry solids, please make a deck with an uphill angle. The rotation can be clockwise or anti-clockwise

Moreover, clients will use the AIPU shaker to process the slurry or some high water content mixture of sand and water, etc. The Hunter shaker will help much to save the economic benefits and the time benefits for clients.

Based on different requirements of the job site the drying shaker can be made as dual tandem and the triple tandem, too. The G force of the motor can be adjusted according to practical demand. It's easy to achieve. The higher vibration strength will lead to less flow rate but a better drying effect and better performance.

Please feel free to contact AIPU Solids control. Get a free offer now!