Large Capacity 6 Inch Inlet Oilfield Drilling Mud Desilter

Oilfield Drilling Mud Desilter Is Mainly Used In Oil Drilling Fields, All Spare Parts Are Available At Aipu

Introduction of Aipu oilfield drilling mud desilter

Aipu desilter is the third class solids control equipment to treat the drilling fluids. According to the size of the cone diameter, they are divided into Desander and Desilter. Usually the cone diameter is less than 6″is called Desilter, and used as the third-control equipment in drilling operation. We commonly used 5 "and 4" cone to separate solid-phase particle size 15-47μm in the drilling fluid. Based on customer requirements and capacity, we can select groups of cone into Desilter.GN Desilter works very well with Solids control system other equipments.

Application of oilfield drilling desilter

APCN series desilter is the third phase solids control equipments in well drilling mud system

Oilfiled desilter separators are one of the important equipment of controlling the solids in the drill fluid. The action is to remove the harmful solids, promote the drill fluid performance and separate 15～47 μm solids particles accounting for over 60% of solids quantity.When the quick drilling is made in the soft formation, the shale shaker only can remove large solids particles, but the Hydrocylone Desilter separators can remove fine solids particles, fully promoting the solids control efficiency. Therefore, it is especially suitable for the well site where the formation is considerable hard and the drilling speed is slower so that the cuttings is very fine in particle size.
As different treating capacity , you can choose the number of cyclone . Normally speaking , 8 no. of cyclone is availeble , and you can choose 10 , 12 , 14, 16, 18, 20 according to your requirement.

Technical parameters of APCN oilfied drilling desilter

Please check above technical parameters for your reference. And some configuration is customizable. For any question or demand, just feel free to contact AIPU solids. You will get a professional proposal very soon.

Oilfield rilling mud desilter configuration

Oilfield Desilter is the third phase solids control equipments after shale shaker and desander equipments. It is made by desilter cyclone, inlet and outlet pipeline, steel frame and shale shaker for bottom drying. 

The desilter is mainly treat drilling mud by desilter cyclone by centrifugal force. It is popularly use 4” desilter cyclone for separate solids 15 – 25 microns and above, the majority larger solids particles was separated by centrifugal force and drop out from desilter nozzle and fluids content overflow from top outlet and discharge to tank compartment. There maybe a set of shale shaker on bottom of desilter cyclone, it is installed in finner mesh screen for drying solids particles out of cyclone. The mesh size choose from API 140 to API 325 depending on drilling requirement. The desilter mud flow can be 500GPM to 1500GPM depending on cyclone quantity.

Features of APCN oilfield drilling desilter 

• 100% Polyurethane ( PU ) material to make desilter cones for longer lifespan.
• Clamp type for easy maintenance.
• Compact design with small footprint.
• Flexible options for 8, 10, 12, 16 or 20 pieces of 4" or 5" cones for different capacities.
• Flexible fast connection is available for user assembly.