Drilling Mud System APFI 50HZ 60HZ DN200 Flare Ignitor

APFI ignitor connected to Mud gas separator for drilling mud system used in oilfield

APFI flare ignition device is also referred as to flare ignitor or the gas flame. It can be used in oil and gas drilling site as well as the gas station to burn the extra and the vented poisonous gas. The flare ignition device is connected with venline on degasser to burn the harmful gas. It is usually painted in red color as a warning at oilfield. The fuel of the ignitor can be diesel oil or the LNG. When we to burn the gas out of degasser, the fuel tank will assist the whole ignition

Why do we need the APFI ignitor?

The flare ignition device is used to light the waste gas in oil and gas industry. It is connected with poor boy degasser, which separate gas from drilling mud and vent gas to flare ignition device

Burn the harmful or poisonous gas by igniter will eliminate threaten to environment and safety. Every flare ignition device will be operated together with mud gas separator. They will be connected with the vent line or gas discharge line. They are widely used in oil and gas drilling.

Besides traditional flare igniter, Aipu also manufacture the ignition device with solar panel. The battery will be charged under sun energy. This is more environmental-friendly with green energy.

For each flare ignition device, we’ll configure the burner, the control panel, the joint connection, a small tank with LNG. Between the ignitor and the fuel line there is a flame arrestor ensure the safety during igintor operation

What is the main configuration of flare ignition device?

There is the arrestor, the torch, the flame pin, the control panel, the fuel tank or the connection line. If we use the diesel oil as the fuel, there will be no diesel tank but the connection line between the ignitor and the fuel tank at site.

Some flare ignition device is powered by solar panel. This configuration is more and more popular. It's more environmetnal-friendly and convenient to get the power source.

What are the types of flare ignitor?

Based on the installation way, there are vertical type and horizontal type. That means the torch port direction is parallel to the ground or normal to the ground.

Based on the fuel material, there are LNG flare ignition device, or the diesel flare ignitor. Considering the power supply, there are the electrical gas flame and the solar gas flame.

If consider the control pattern, there are fixed control panel and the remote control gas flame. Besides the above division, we can customize the gas flame according to the user and the practical working condition. Such as we made the extrah gas flame for an oil drilling company. The overall height is about 5m.

Features of APFI20/3 Ignitor

Stainless steel burner torch
Mature design with successful job site performance
Conventional battery or solar battery
Custom built available

Technical specification of AIPU flare ignition device

Please check below technical specifications for your reference. And some configuration is customizable. Please contact us for more details

For any question or demand, please feel free to contact AIPU solids. You will get a free offer on an optimal solution, you will get a professional proposal very soon.